• I have the II on my old system and it was a very good cooler. I've had it for 3 years. For this reason, I also got the III now.

    More difficult to install than the II but in the end, it fit and temperatures are permanently <60 even on-load with the 7800X3D.

  • G.Skill Trident Z5 Neo RGB 32GB DDR5 RAM with 2 Modules (2x16GB) and 6000 Speed for Desktop

    0
    5
    1 out of 1 members found this review helpful
    Verified purchase

    CL30 and I was looking for them for about 2 weeks to find them available and at a reasonable price. They are paired with 7800X3D and the EXPO/XMP works without any problems at all.

  • Gigabyte B650M Gaming X AX rev. 1.x Wi-Fi Motherboard Micro ATX with AMD AM5 Socket

    0
    3
    3 out of 6 members found this review helpful
    Verified purchase

    I set up a new system, put everything on it, and it wouldn't turn on. 7800X3D + 4070s + 32GB ram.

    After a lot of troubleshooting, it finally turned on after a CMOS clear. I don't know why a new system didn't work but needed a reset. This has never happened to me before.

    After that, everything was fine, and the EXPO that I enabled worked without any issues.

  • It contains everything including a 12VHPWR adapter with 7800X3D + 4070s.

    I take off one star because I have experienced 2 sudden restarts on a new system with a new OS, and the most likely culprit is the power supply since I changed everything else.

    Also, when you turn the PC on and off, it makes a click noise that I was searching for the reason for during the first 3 days to see if it was defective, and I finally found it in a question in their FAQ only (https://www.bequiet.com/en/faq -> Power Supplies -> last question).

  • Together with 7800X3D and 32GB cl30 6000 RAM, I have everything on ultra at 1440p 165hz screen. It hasn't struggled anywhere.

    I also did an undervolt from 1.095v/2805mhz to 1.015v/2805 and the consumption went from ~220+ watts to ~170 watts without losing any performance. First time ASUS card, so far it's good.

  • Very good quality, the button mixes faster the harder you press it. It's not just on-off. Very good and convenient so it doesn't splash what you're mixing everywhere since you press it lightly at first for slow speeds and then you can go as fast as you want.

  • De'Longhi Inissia Pod Coffee Machine for Capsules Nespresso Pressure 19bar Black

    0
    4
    2 out of 3 members found this review helpful
    Verified purchase

    First coffee maker, so I don't have much experience to compare, but it does the job just fine.

    I don't give it 5 stars because it has the worst instructions I've ever seen, they make no sense at all, and also because 1 out of 15 capsules I put in won't run easily, and instead of coffee flowing, it drips coffee. It's not from one brand; it has done this with various capsule brands.

  • For coffee, the size is just right because it fits comfortably in both the coffee maker and the mixer. I use it every day for coffee, I clean it after each use, and there is no issue with rust that I see in other reviews, nor anything else. Also, both the material and the welds on the filter are of good quality.

  • It charges normally, but the charge level indicator is not accurate at all.

    I used Eneloop pro 2500mAh batteries for charging, it took about an hour at 0.5A to fill all 4 lines, but when I measured them, the batteries were almost at ~75%. I had to remove them and put them back on to continue charging.

    It does charge them, but it's not convenient at all to constantly have to check it. I wouldn't buy it again.

  • Kingston NV2 SSD 1TB M.2 NVMe PCI Express 4.0

    0
    5
    2 out of 2 members found this review helpful
    Verified purchase

    It is the 5th Kingston SSD that I have purchased.

    In general, I have never had a problem with Kingston products, so I continue to use them.

    It functions typically, mainly for gaming, and the games have excessively short loading times.

  1. 1