It is suitable for individual use (application only in one supply) in the bathroom, it can be installed easily and quickly. It offers convenience in use or maintenance and meets your daily needs for hot water.

It is equipped with a built-in digital display that shows you the water temperature and also gives you the option to select it yourself.

• Automatic ignition with the opening of the tap via an electronic mechanism
• Ability to adjust gas supply power and without continuous flame - pilot
• Safety valve (release) for protection from high pressure
• Maximum water pressure 7.5 bar
• Minimum water pressure 0.25 bar
• Switch - on/off
• Water regulation valve
• ODS (oxygen depletion system)
• FFD system (flame detection mechanism)
• Soft start for progressive and silent ignition
• Extremely easy installation and maintenance
• Safety protection against water shortage
• Possibility of installation indoors & outdoors

The instant water heater is a type of water heater that heats water in real-time. It only heats the water that passes through it at that moment. There is no hot water storage tank. This has many advantages, such as energy savings, since only the water that is used is heated, and longer lifespan, as there is no water tank and no accumulation of salts on the resistance and other components.

It operates with liquefied petroleum gas (LPG), and no electrical installation is required.

The device operates only with a Low-Pressure Regulator 3kg, 30mb.

The instant water heater has an inlet pipe for cold water, which passes through the resistance, heats up, and exits through the hot water outlet pipe. A necessary condition for the instant water heater to initially function is the pressure of the incoming cold water should not be too low.

The water temperature is regulated by a thermostat, so it does not exceed a maximum value. The temperatures that the hot water reaches are preset so that one can use the hot water directly, without needing to mix it with cold water.

The maximum temperature that can be reached for hot water production is 50 °C, while the maximum water flow rate reaches up to 8 liters per minute. Indicatively, 38-42 °C degrees are standard for shower use.

• It is small in size and does not take up much space.
• There are no energy losses, as only the water being used at that moment is heated. Therefore, we save on the electricity bill. In a traditional water heater, the hot water that is not used goes to waste.
• The hot water used in the instant water heater is used as is, without mixing with cold, as happens in a traditional water heater. Thus, we also save water, in addition to electricity.
• There is no need to wait for the water to heat up. As soon as we turn on the tap, hot water flows in a few seconds. The traditional water heater takes a few minutes, depending on its size.
• The hot water never runs out. As long as we have the tap open, we will have hot water.