Reviews by our members

• 5

  1 out of 1 members found this review helpful

  Sim_Zar

  2022-03-23

  Verified purchase

  This review is about a variation of the product

  I bought this specific ceramic resistor PSX-7-240B after doing some research on the internet.

  I used-installed it for the pellet stove I have (the old resistor-coil) which was metallic and burnt out after 5 years.

  I used it in a KING brand pellet stove, specifically the KING98-BKI model.

  It screwed on properly onto the thread of the stove pipe. The thread of the resistor is 3/8" (you will need a 17" wrench).

  It is slightly shorter than the metallic resistor it replaced, but it has no problem at all. It ignites faster as a resistor and the pellets catch fire normally without any issue.

  Now, how long it will last, only time will tell

  Translated from Greek · Show original

  • 
  • 
  Did you find this review helpful?YesNo

  Report
• 5

  10 out of 10 members found this review helpful

  Konstantinos_Satanakis

  2021-02-17
  This review is about a variation of the product

  I replaced a 300W metal resistance (coil) measuring 14cm in length (13cm from the beginning of the pass) with the ceramic resistance PSX-7-240B. I am not a technician, I just have some basic knowledge. The reason for the change was the trouble I had been experiencing with the metal resistance for the past 2 years. At first, occasionally, the boiler would display an error. It would fill the tray with pellets without igniting. Gradually, the symptoms became more frequent until one day the resistance suddenly died. I chose the ceramic resistance for two reasons: a) for its faster ignition speed due to the higher temperature it generates, and b) for its longer lifespan (according to the specifications) compared to the traditional metal resistance.

  The traditional metal resistance takes about 830 degrees in 4.5 minutes, while the ceramic resistance exceeds 1000 degrees in 1.5 minutes. This means faster ignition of the pellets and savings in electricity consumption.
  Watch a related video with a similar model: https://youtu.be/mRoc_OYMMH0

  I purchased it with some reservations because I didn't know if it would fit easily into the boiler's flue pipe. I read that it fits in any pellet boiler or stove with a flue pipe diameter not less than 18 millimeters. There needs to be a minimum distance between the resistance and the walls of the flue pipe so that hot air can enter the tray with the pellets and ignite them. Measuring the diameter of the flue pipe is not easy due to its difficult position inside the combustion chamber. So I had the following thought: since the diameter of the metal resistance is 10 millimeters and the diameter of the ceramic resistance is 11.5 millimeters, the difference is 1.5 millimeters. With the naked eye, I saw that there was enough space.

  Also, the length of the ceramic resistance is much shorter than the length of the metal resistance. Before installation, I thought this was a disadvantage. However, I found that it doesn't play any role at all. Ignition occurs in 2.5 to 3 minutes. This time is very short, considering that there is a dead time until the tray is filled with the necessary amount of pellets.

  I chose the PSX-7-240B because it is internally hollow, like a tube. Thus, according to the manufacturer, it generates temperature both externally and internally. Theoretically, this will result in better circulation of hot air.

  Electrical connection is required. If you are not comfortable with it, call a technician.

  I hope I helped.

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 5

  1 out of 1 members found this review helpful

  Pro_Alex25_God

  2021-06-25
  This review is about a variation of the product

  Excellent. PSX-7-240B Resistance for Pellet Stove.

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report