Always start with 800 grit sandpaper (hard) and continue with finer grits 1200 - 2000.
- Pour clean water into the bottom of the kit package and soak the sandpapers in water for 5 - 10 minutes.
- Place protective tape around the headlight.
- Sand the headlight evenly without applying too much pressure using the water sandpapers in the order 800 - 1200 - 2000 (from coarsest to finest).
- For better results, use a screwdriver or an electric tool with the provided adapter for sanding.
- The sandpapers should be constantly wet and make sure to use all the sandpapers for better results.
- Remove the sandpapers from the base and after cleaning the headlight from dust and the special base, place the sponge and polish with the compound until you achieve the desired result. Again, the use of an electric tool will be very helpful.
- Finally, apply a thin layer of UV protection compound with the sponge.
- After finishing, do not wash the headlight for a period of time until the applied compound is completely dry.
Caution:
If you are unsure if you can perform the task, consult a professional.
Always wear eye and hand protection, as the compounds can cause harm.